Description: | Pro-Ject Classic Line Turntable with inverted bearings and phono input |
Features: | <div>
<strong>Turntable</strong></div>
<ul>
<li>
Available finishes. Mahogany or olive veneer and piano-lacquered black </li>
<li>
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt. </li>
<li>
The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones. </li>
<li>
The motor is decoupled from the plinth to reduce vibration transmission. </li>
<li>
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced aluminium platter and a cork mat (a standard felt mat is supplied also). </li>
<li>
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing. </li>
<li>
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided. </li>
<li>
External power supply avoids potential electro-mechanical interference. </li>
</ul>
<div>
<strong>Tonearm 8.6c </strong></div>
<ul>
<li>
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted. </li>
<li>
Conical carbon-fibre armtube avoids standing wave reflections. </li>
<li>
Low mass aluminium headshell securely glued to armtube. </li>
<li>
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes. </li>
<li>
Flexible counterweight shaft avoids vibration at undesirable frequencies. </li>
<li>
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). </li>
<li>
The counterweight supplied is suitable for cartridges weighing between 7 - 12g . An alternative counterweight for cartridges weighing between 4 - 7g is available as an accessory part. </li>
<li>
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. </li>
<li>
Silicone-damped armlift can be adjusted to suit working height of the arm. </li>
<li>
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. </li>
</ul> |